Sundance® Spas

Sundance® Spas Freeze Sensor 15 foot Cord

6560-423 SUNDANCE®® Temperature Sensor with White Plug Connector For 505, 601-605, and 624 Balboa Systems only! The spas were built in the 1980's. Do not use this sensor on 700 or 800...

6560-410 SUNDANCE®® Temp FittinSUNDANCE®® Spas wall fitting for use on older SUNDANCE®® Temperature Systems with "Bullet" Style Stainless or Plastic Temp Sensor...

SUNDANCE® Spas Power Transformer, 115v/230v, 12v, without Plug This transformer is for following brands series/control system boards. No plug at end of wire. If you need the version with plugs,...

Sundance® Spas 6560-248 Retrofit Light Harness Pre-1987 New Version Without Metal FrameLight harnessfor SUNDANCE® 601, 602, 603 Systems. Click here for the required bulb

 SUNDANCE® Spas Light Wiring

Sundance® Spas Light Bulb for Hot Tub Spas Underwater Light Bulb

6560-235 SUNDANCE® Spas Hi-Limit Sensor, 12 inch   Single pole rated at 25 amps with temperature rating set at 121°F. Best results are obtained when the bulb is installed in a...

6560-230, SUNDANCE® 30" Long High Limit Sensor for 602 Systems.

275-3287-00, Eaton Mears Hi Limit1/4" x 12", SPST, 25 Amp Single pole rated at 25 amps with temperature rating set at 121°F. Best results are obtained when the bulb is installed in a dry well or...

6560-046 SUNDANCE®® Spas Gasket, Heater Housing   Goes between the Heater Element (6500-216) and the Connector Box (6560-041). Get the job done right the first...

O-Ring for Heater Unions 6560-044 Sundance® Spas Jacuzzi® 2 qty Size: 2-3/8"ID x 2-5/8"OD x 1/8" thick