Sundance® Spas Smart Heater Assembly for 850 & 880 Series, 2000-2015, Maxxus, Optima, Cameo, Majesta, Altamar, Marin, Capri, Aspen

LATEST Version 2000+ Sundance® Spas Smart Heater Assembly for 850 & 800 Series

***NEED TO REPLACE The High Limit Sensor 6600-168 at the same time.  It is plugged into the bottom of the heater housing.  It is a bullet sensor that slides into a drywell. 

All 2000-2004 Sundance 850 Series Models: Maxxus, Optima, Cameo, Majesta, Altamar, Marin, Capri
All 2005 Sundance 850/880 Series Models: Maxxus, Optima, Cameo, Majesta, Altamar, Marin, Capri
All 2006-2015 Sundance 880 Series Models: Maxxus, Optima, Cameo, Majesta, Altamar, Marin, Capri, Aspen

The Hi Limit Sensor may be held on by silicon and is removable to be used with the new heater.
DOES NOT COME WITH 6600-168, high limit sensor. These come as COMPLETE UNITS ONLY.
Sundance® Spas does not offer just the elements, housings or Orings.

IMPORTANT NOTE: This Smart Heater has a slightly smaller dry well. When installing these heaters into spas manufactured prior to April 2007, you can no longer use the OEM Hi-Limit Sensor since it is too large to fit into the new heater's sensor well. You will need to replace both the Smart Heater and Hi-Limit Sensor as a set. High Limit Sensor 6600-168

Note regarding spas built 1/2000- June 12, 2000:
When first introduced in 2000, they had a small pc board that was in the back of the heater.

After June 12, 2000 the pc board was no longer used. This part is no longer available and do not connect to new heater.