Artesian® Island Spas Heater, Laing SSPA 7130, 60Hz, Stainless, 230v, 5.5kW, Trombone Heater

Artesian Island Spas Heater, Laing, SSPA 7130, 60Hz2 30v, 5.5kW

This is a "trombone" heater for Artesian Island Spa.  The tubing is stainless steel.

This version is for USA models Artesian Island Spas.

Current Version Replaced 23" X 10" X 15" Squareback 3-Wire with Built in Thermal Cut-Out. Includes Heater Element and Hi-Limit

Low-flo heater 5.5 kW Tube **FEMALE SPADES** wire connections

Note: Plumbing Adjustments May Be Required for Replacements Due to Original Heater Not Available

 Tech Tip: 

The original heater by Laing is no longer available.
Therefore, older system heaters may require modification.
The new heater may not fit around the spa pack and must be REMOTE MOUNTED.
There will be differences with the new heater and the old unit.
The new heater will have 3 wires, instead 2 wires.
Connect the Black wire and White wire to the circuit board. The Green wires is the ground wire.
Similarly, water fittings / connections may not be the same size.
You will need reducer like a small piece of clear pipe set around the smaller connection.
This will allow you to slip the larger connection over it.