Description
Energy Saver Sundance® Spas 20XX Cameo Circulation Pump, 3/4" Barb, 230 Volt E10-NSHNDNN2W-01 Version 2
- 3/4" Barb, 230 Volt E10-NSHNDNN2W-01-Version 2 @ 10 GPM
- E10-NSHNDNN2W-01, Laing Pump, 230 / 240 Volt 3/4" inch barbed connection.
- The E10-NSHNDNN2W-01 , replaced Laing Pumps with a 3/4 inch barbed fitting, 230/240 Volt. Includes power cord but no plug at end.
- Now has built in plastic base for easy installation and to eliminate rust from the old metal base plate. This version replaces all prior Laing pumps. These are a smaller, lighter and more flexible mounting options.
- The Laing E10 Eco Circ Pump is used on many spa/hot tubs and can be used to replace most brands of circulation pumps with 3/4 inch barbed fittings.
- This pump is 40% more efficient than prior models. It also has a smart "chip" to regulate rpm at start up to minimizes cavitation and air locks.
- The pump will NOT operate without water. Do NOT bench test this pump without it being in the spa so the pump is water primed. The pump was tested at the factory. There may be water left in the wet end.
Replaced prior versions:
- SM909-NH-14 3/4" Barb 230Volt
- SM909-NHW-14 3/4" Barb 230Volt
- SM909-NH-18 3/4" Barb 230Volt
- SM909-NHW-18 3/4" Barb 230Volt
- SM909-NH-26 3/4" Barb 230Volt
- SM909-NHW-26 3/4" Barb 230Volt
- SM959-NHW-26 3/4" Barb 230/50Volt
- SM1212-NH-26 3/4" Barb 230Volt
- E10-NSHNSW-20
- E10-NSHNDNN2W-02
- E10-NSHNDNN2W-01
- 6000-125 or 6000-125E Sundance® and Jacuzzi® part number
-
This pump replaces old part numbers used by Sundance®, Jacuzzi® and other Manufacturers:
SM-909-NHW-18 3/4,SM-909-NH-18, E10-NSHNDNN2W-01, aka 73979
NOTE: This pump is a 230/240 Volt Pump, the wiring is white, black and green. The white and black are the 2 hot leads. Green is Ground.