Current Version ✅ Strong Spas Topside Control Panel 4 Button Oval EZ Direct Fit Replacement 7 ft Cord

Strong Spas Topside Control Panel 4 Button 
Button Pattern: Jets, Light, Temp Up, Temp Down
8 Pin 6' ft phone style connector
Outside dimensions: 5-1/4" x 2"
Includes Face plate with self-adhesive backing and Overlay
US, Canada, Mexico (60Hz), European (50Hz)

Jets
Touch the “Jets” button once to turn the main
2-speed pump on or off, and to shift between low
and high speeds. If left running, the low speed of the
pump will automatically turn off after 2 hours, and
the high speed will automatically turn off after 15
minutes.
Lights
Press the Light button on the topside control panel
to turn the spa light on. If your spa has perimeter
LED lights, they will also light up at the same time as
the spa light. LEDs operate in four modes.The mode
is changed by turning the light off and then immediately back on
1. Fading: The lights will cycle through all the
colors in this order:White, Cyan, Magenta, Blue,
Chartreuse, Green, Red
2. Color Locked: This cycle offers a hard color
change without fading.
3. Quick Color Change: Each time you press the
button, you advance to the next color.
4. Flashing white: The LED lights will flash white.
“WARM / COOL” Buttons
To display the Set Temperature, press either the
“WARM” or “COOL” button once. The LCD will
begin to flash the set temperature. If you want to
increase or decrease the desired temperature, press
the “WARM” or “COOL” button accordingly. Once
at the desired temperature, allow a few seconds for
the flashing to cease. Your Set Temperature has now
been successfully set.