6600-106 Sundance® Temperature Sensor for Drywell EP 800 Systems Inground Spas

6600-106 SUNDANCE®® Temperature Sensor for Drywell EP 800 Systems Inground Spas

To remove a sensor or switch wire from the sensor harness connector, insert a paper clip into the slot corresponding with the wire to be removed. This will depress the pin tine, allowing the wire to be pulled from the harness connector.

Important! When reinstalling the sensor or switch wire back into the sensor harness connector, make sure the pin tine is lifted (approx. 1/32" prior to inserting the wire. This will insure the sensor wire locks into the harness connector. Do not over bend the pin tine or it may break off.