2004 OEM Sundance® Sweetwater Palermo Circuit Board Circulation Pump Logic Chip P1=2SP, P2=1SP 230V

Write a Review
SKU:
PL04PCB
Availability:
Free Shipping
$578.00

Description

2004 OEM Sundance® Sweetwater Palermo Circuit Board With Circulation Pump Logic  P1=2SP, P2=1SP 230V

Jumper settings are as follows:

Jumper 2 - On 1 Pin - 15A, On 2 Pins - 50A

Jumper 4 - On 1 Pin - 2 pumps, On 2 Pins - 1 pump

Jumper 6 - Used along with Jumper 2

Jumper 8 - On 1 Pin - Celsius temp display, On 2 Pins - Fahrenheit temp display

This board includes the logic chip pre-installed, and is compatible with both 60 Hz and 50 Hz power

This board is for circulation pump systems (see CIRC52160 for circulation pump).
Comes with a Series 3 chip.If your circuit board has a Software Chip that begins with a 3, then this is the correct series board. SUNDANCE® has revised this chip several times, we send you the board with the current chip. If you have an older board without a Circulation pump, then you need a board with a Series Chip that starts with a 5.
 
If you have an older board WITHOUT a Circulation pump (see CIRC52160 for picture of circulation pump), then you need a board with a Series Chip that starts with a 5. This would be a PCB02766 (6600-287) board. ALL 6600-287, 6600-087 boards (without circulation pump logic, Chip 5.54) and 6600-288, 6600-088 (with Circulation Pump Logic, Chip 3.56 or higher) are identical but use different microchips.
View AllClose

Related Products

Related Products