Description
Sundance® Spas Jacuzzi® Hot Tubs Motor Mount Insulator .75" or 3/4" rubber (Qty 2)
6570-023 Motor Mount insulators are used on the Sundance® Spa Pumps.
Typically when they come off, the lower threaded section stays screwed into the wood and is usually seized in the wood by rust. The part that comes off is only part of the Insulator.
To make them work, you would have to cut off the bottom threaded shaft unless you can extract the other part out of the screwed fitting mounted in the wood.
Ref. No. | Descripton | Pump | Part No./ SKU |
1A. | Housing back, TheraMax (Volute), 56 Frame (Export) | All | 6000-152 |
1B. | Housing back, TheraFlo (Volute), 48 Frame | All | 6000-153 |
2A. | Seal assembly (North American)-PS200 | All | 6500-447 |
2B. | Seal assembly (Export)-PS200 | All | 6500-446 |
3A. | Impeller (North American), TheraMax (2.5 HP) | All | 6000-036 |
3B. | Impeller (North American), TheraFlo (2.0 HP) | All | 6000-048 |
3C. | Impeller (Export), TheraMax (2.0 HP) | All | 6000-220 |
3D. | Impeller (North American), TheraMax (1.5 HP) | All | 6000-049 |
4. | Wear ring | All | 6000-205 |
5. | Housing O-Ring | All | 6000-154 |
6. | Housing front (volute) | All | 6000-151 |
7. | Drain plug O-Ring | All | 6000-204 |
8*. | Drain plug | All | 6000-047 |
9A. | Union assembly (straight) includes O-Ring | All | 6500-232 |
9B. | Union assembly (45°) includes O-Ring | All | 6500-037 |
10. | Nut | All | 6570-126 |
11. | Washer (split lock) | All | 6570-127 |
12. | Washer | All | 6570-509 |
13A. | Motor mount insulator (North American), 0.75" | All | 6570-023 |
13B. | Motor mount insulator (Export), 1" x 1.25" | All | 6570-011 |
14 | 2" Replacement split nut | All | 6000-031 |
15A. | Start capacitor (Export/50 Hz-EMG Motor) | All | 6000-116 |
15B. | Start capacitor (Export/50 Hz-Magnetek Motors) | All | 6000-112 |